Skip to main content

Lobel Solar 5 HP VFD Controller for Pumping / Irrigation System





Lobel Solar Power System

Shine Power Panel

Rural India, the agricultural heartland of the country, is plagued by a severe electricity deficit. On the other hand, the country receives enough sunlight in a year. To meet all its energy needs. So, it is not surprising those farmers, industrialists and even housing Societies are switching to solar power as an alternate power source. And, Lobel Solar Systems is leading the way towards a reliable, cost-effective pumping solution that works on solar and regular 3 phase power supply- the Shine Power Panel.




Single Panel Dual supply

The Shine Power Panel offers farmers a range of benefits:

§    Flexibility: Only Standard Power Panel that can operate a pump on both, solar and 3-phase supply.

§    Compatibility: Compatible with surface and submersible pumps as well as Induction and Permanent Magnet Motors.

§    Convenience: Switches between Solar power and 3-phase power automatically or manually.


In-built MPPTè Great savings
The Lobel Solar Systems Shine Power Panel is the only standard AC Panel that offers an in-built Maximum Power Point Tracker (MPPT). It has a range of unique features that can help you save.


§    Maximum power, maximum output: The in-built MPPT helps you extract the maximum available power from the Solar PV, since no extra hardware is required for tracking power Enhanced conversion rate: The conversion from DC input to 3-phase AC takes place even at 300V DC which remains constant irrespective of the drive rating.

§    Increased efficiency: An internal MPPT does not consume any extra power, thereby enhancing the overall efficiency and providing automatic calibration of the maximum power point.
Tough outside Ã¨ Smart inside
§    Rugged all-weather casing for greater durability.

§    Auto-restart facility.

§    Built-in energy monitoring.

§    Conformal coating to vital components to protect against harsh environment.

§    Complete motor protection.

§    Stores last 10 faults with fault trace for last fault.

§    Provides information on maintenance and remaining life of components.

§    Highly-integrated design results in fewer parts and interconnections, reducing the number of failure points.

§    Plug in cooling fan means easy maintenance.

§    Dry run protection.



Schematic diagram of Shine Power Panel installation
Shine Power Panel Specifications

MPP voltage range (Vmpp)
550-610V












Maximum Open Circuit Voltage (Voc)
800V







Standard






Output Voltage
Proportional to input voltage



Specifications









Output frequency
0 -400 Hz












Over voltage protection
Yes












Short-circuit protection
Yes














Yes



Under voltage protection







Protection

0utput phase loss

Yes












Motor Overheat protection
Yes











Ground Fault protection
Yes












Area of use
Indoor I Outdoor (with Enclosure)









Environmental

Ambient Temperature
-1O to +50oC without deration








tolerances

Humidity
95% RH or less (no condensation)













Altitude
Upto 1000 meters










Standard

RoHS compliant, UL 508C, EN61800-3, EN61800-5-1, EN954-1, ISO 13849-1,

Compliance

IEC/EN61508 SIL2










                      Lobel Solar Power System

“Lobel House” 65 Mihir Park, 
Nr Tube Company, O P Road, 
Vadodara – 20, Gujarat.

                info@lobelpower.com, 

www.lobelpower.com


Comments

  1. Blogger28 January 2017 at 10:01

    You may be qualified for a new government solar energy program.
    Click here and find out if you are qualified now!

    ReplyDelete
  2. Unknown9 August 2017 at 03:22

    Thanks for sharing the useful information. It was really amazing and very informative. Keep sharing more article.
    Solar Panels For Your Home Cost
    Solar Las Vegas

    ReplyDelete

Post a Comment

https://lobelpower.com/

HOTLINE NO 9998931555

Popular posts from this blog

Know the difference between Perc, TOPCon and Heterojunction technology (HJT)....

Solar panel manufacturing technology has come a long way over the years & there have been significant advancements recently with the introduction of mono PERC, Topcon and mainly Heterojunction technology (HJT) technology. These new technologies have led to improvements in solar module efficiency, durability and overall high performance so making them a more viable and cost-effective option for solar PV power generation. Colleagues, Let us know each  solar PV module  technology and understand the differences. 👉💥About PERC Technology : PERC stands for Passivated Emitter & Rear Cell. The PERC solar cell has a presence of a passivation layer at the back side of the cell which helps to minimize recombination losses and increase light absorption.  The key role of the rear-side passivation layer is to reflect light that passes through the silicon cell without being absorbed back into the silicon. By reflecting this light, the passivation layer gives the solar cell seco...
Post a Comment
Read more

Lobel Solar Water Pumping System

  Submersible Pump Lobel Solar Water Pumping Systems is a stand-alone system operating on power generated by Solar Photovoltaic Panels. The power generated by Solar Panels is used for operating Solar Submersible pump for lifting water from open well, water reservoir or tube well for irrigation and drinking water purpose. The system requires a shadow-free area for installation of the Solar Panels. System Components Solar Photovoltaic Panels Structure & Accessories Solar submersible pump Solar Controller / VFD Special Features of Solar Powered Pump No inverter - D.C. motor connects directly to solar array Rugged construction Simple installation and maintenance Highly reliable Applications Village water supply Livestock watering Water supply to remote homes / agriculture Micro-Irrigation Benefits No conventional grid electricity required Long operating life Highly reliable...
40 comments
Read more

Lobel Solar Fencing Machine / ZATKA MACHINE / An Electric Security Fence / 9327007854

DESCRIPTION OF SECURITY FENCING AND ITS  WORKING IN  GENERAL Lobel Security Fencing is the modern day’s alternative to the conventional type of perimeter protection. These are active fences and punish the unwelcome intruder the moment they touches the fence or try to tamper the fence. The conventional types of fences are only passive fences and cannot resist the intruder if they try to forcibly intrude into the protected area. The Security Fence gives a sharp, short but a safe shock and creates psychological fear. Against any tampering the alarm incorporated in the system gets activated and alerts the inmates of the protected area, which facilitates them to counter the unwelcome intruders. The Security Fence is scientific fence and works on Energy with backup facility to run uninterruptedly during the nights as well as cloudy days. The whole system can be derived into two segments, one is the Basic system with CS 250 Unit (Without keypad) and the other one is the Fenc...
26 comments
Read more