Skip to main content

Lobel Solar AC Distribution Box (ACDB) & DC Distribution Box (DCDB)

Lobel Manufacturer and supply of AC Distribution Box & DC Distribution Boxes are an important part of solar PV system to provide and maintain the system to manage an electrical supply to different areas as per the requirement.

The main purpose of the ACDB is to eliminate the operation of the load at the immediate PCU O/P end and also provide flexible operation of different loads like street lights, general home or office lights and option loads that optionally operated (ON/Off). The ACDB box is made of epoxy powder coated metal casting. Three feeders are provided in ACDB with MCB of required capacity installed at each feeder in the ACDB. 


Lobel DC Distribution Box is used to provide flexibility for the operator of the solar power plant to disconnect and connect both the inward solar supply and battery terminals. Here an MCCB and a fuse of proper rating depending upon the capacity of the power plant and the battery bank are used. In the DCDB we have two sections one is the solar section and the order is the battery section.

Lobel Solar Accessories

The Lobel Advantage!

  • Design Expertise: Custom designed by solar engineers as per requirements of IEC 62548, IEC 60364 and CEA guidlines
  • Reduce installation time: Ready plug and play design with color coded and numbered cables for minimal on site assembling time 
  • Freedom to connect: IP 65/57 rated dust, moisture proof for outdoor/indoor use as per site requirement 
  • Zero failure: Assembled using equipment from industry leading manufacturers and suppliers for minimal failure rate 
  • Ready supply: Low turn around times with deliveries within 5-7 days of order confirmation 
  • Cost effective: Cost effective customised solutions for kW to MW scale solar systems

Comments

  1. Really nice article!! I am glad to read your post, pretty informative.

    Solar Las Vegas
    Solar Las Vegas

    ReplyDelete
  2. In electrical engineering we have to good knowledge about same field and also up to date with all compontent and its use.. And we got all from here.. Thanx

    Electrical control panel manufacturers

    ReplyDelete
  3. Great information regarding solar acdb and solar dcdb. Thanks for sharing.
    Manufacturers & Suppliers of Solar DCDB

    ReplyDelete
  4. Solar energy Nigeria is one of best company in the country. We sell give service and install solar energy system on a very worthy price.energy management in Nigeria

    https://www.agujoerenewable.com/store

    ReplyDelete
  5. Thanks for this posting. The information which you have provided is very good. Keep sharing such ideas in the future as well.

    MNRE Approved Solar Panels

    ReplyDelete

Post a Comment

https://lobelpower.com/

HOTLINE NO 9998931555

Popular posts from this blog

Know the difference between Perc, TOPCon and Heterojunction technology (HJT)....

Solar panel manufacturing technology has come a long way over the years & there have been significant advancements recently with the introduction of mono PERC, Topcon and mainly Heterojunction technology (HJT) technology. These new technologies have led to improvements in solar module efficiency, durability and overall high performance so making them a more viable and cost-effective option for solar PV power generation. Colleagues, Let us know each  solar PV module  technology and understand the differences. 👉💥About PERC Technology : PERC stands for Passivated Emitter & Rear Cell. The PERC solar cell has a presence of a passivation layer at the back side of the cell which helps to minimize recombination losses and increase light absorption.  The key role of the rear-side passivation layer is to reflect light that passes through the silicon cell without being absorbed back into the silicon. By reflecting this light, the passivation layer gives the solar cell seco...

Lobel Solar Water Pumping System

  Submersible Pump Lobel Solar Water Pumping Systems is a stand-alone system operating on power generated by Solar Photovoltaic Panels. The power generated by Solar Panels is used for operating Solar Submersible pump for lifting water from open well, water reservoir or tube well for irrigation and drinking water purpose. The system requires a shadow-free area for installation of the Solar Panels. System Components Solar Photovoltaic Panels Structure & Accessories Solar submersible pump Solar Controller / VFD Special Features of Solar Powered Pump No inverter - D.C. motor connects directly to solar array Rugged construction Simple installation and maintenance Highly reliable Applications Village water supply Livestock watering Water supply to remote homes / agriculture Micro-Irrigation Benefits No conventional grid electricity required Long operating life Highly reliable...

Lobel Solar Fencing Machine / ZATKA MACHINE / An Electric Security Fence / 9327007854

DESCRIPTION OF SECURITY FENCING AND ITS  WORKING IN  GENERAL Lobel Security Fencing is the modern day’s alternative to the conventional type of perimeter protection. These are active fences and punish the unwelcome intruder the moment they touches the fence or try to tamper the fence. The conventional types of fences are only passive fences and cannot resist the intruder if they try to forcibly intrude into the protected area. The Security Fence gives a sharp, short but a safe shock and creates psychological fear. Against any tampering the alarm incorporated in the system gets activated and alerts the inmates of the protected area, which facilitates them to counter the unwelcome intruders. The Security Fence is scientific fence and works on Energy with backup facility to run uninterruptedly during the nights as well as cloudy days. The whole system can be derived into two segments, one is the Basic system with CS 250 Unit (Without keypad) and the other one is the Fenc...